Are you a Blix Electric Bike owner looking to get a bit more speed out of your ride? Many riders are thrilled with the performance of their Blix e-bikes, especially models like the Vika+, but sometimes you might want to push the speed limit just a little further for certain riding conditions. If you’ve been wondering if it’s possible to adjust the speed settings on your Blix electric bike, you’re in luck. This guide will walk you through a simple, user-discovered method to potentially increase the maximum speed on your Blix Vika+ model.
Accessing the Advanced Settings on Your Blix Vika+
It turns out that your Blix Vika+ display has an advanced settings mode that isn’t widely advertised, but is surprisingly easy to access. Forget complicated passcodes or dealer interventions. You can enter the programming mode yourself with a simple button combination.
To get started, locate the “+” and “-” buttons on your Blix Vika+ display. Press and hold both the “+” and “-” buttons simultaneously for about 3 seconds. This action should bring you into the advanced settings menu.
Unlocking Higher Speeds: Adjusting the Max Speed Limit
Once you’re in the advanced settings, you’ll notice a few options that you can toggle through by pressing the on/off button on your display.
The first option you’ll encounter is a setting for MI or KM, allowing you to choose between miles and kilometers for your speed readings.
The second option is where the magic happens for speed adjustment. It’s labeled “KM” and is followed by a number, likely “29” initially. This setting isn’t a secondary distance unit; it’s actually the maximum speed limit in kilometers per hour (km/h) that your Blix electric bike is set to reach.
To increase this limit, simply press the “+” button. You can incrementally raise the number. In the original discovery, the rider successfully increased the limit all the way up to 40 km/h. Experiment with caution, raising it in small increments to find a setting that suits your needs and local regulations. If you go past 40, the numbers may cycle back down, so use the “-” button to decrease the value if needed.
The third setting screen you’ll see is for wheel diameter. For a folding Blix electric bike like the Vika+, this is typically set to 20 inches to match the tire size. Ensure this setting is correct for accurate speed and distance readings.
The fourth option screen might be less clear and may not have an immediately apparent function. It’s best to leave this setting untouched unless you have specific knowledge about its purpose.
Saving Your New Speed Settings
After you’ve adjusted the maximum speed setting to your desired level, you’ll need to save your changes and exit the programming menu. To do this, press and hold the on/off button for a few seconds, or it might be the “+” and “-” buttons held together again – experiment to see which action saves and exits the menu on your specific display version.
Real-World Results: Faster Rides!
Once you’ve exited the programming mode, the change is immediate. Testing after this adjustment showed a significant increase in the top speed. Where the motor previously cut off around 18.3 mph (29 km/h), the Blix electric bike now reached speeds up to 25 mph (40 km/h). This isn’t just a display trick; the bike genuinely goes faster, providing a noticeable boost in performance.
By following these simple steps, you can potentially unlock a higher top speed on your Blix electric bike, enhancing your riding experience. Remember to always ride responsibly and be aware of local speed limits and regulations for electric bikes. Enjoy the extra speed and the improved capability of your Blix Vika+!
